→ 
 › 
Wecon 32 I/O PLC : LX3VE-1616MT

Wecon 32 I/O PLC : LX3VE-1616MT

◇ CPU: STM32 CPU, A: AC100-240V power, D:DC24V power. 20W rated power
◇ IO: 16xDI/16xDO (transistor-type), 2-channel 200K high-speed pulse output
◇ Port:2 serial port (RS422/ RS485, RS485),2 BD board supported.
◇ Protocol:  FX2N NO PROTOCOL, LX3VE PROTOCOL
◇ Support 32K-step ladder.
◇ Support N:N network, one PLC could connect eight PLCs;
◇ T50~T191 can be changed to 1ms timers by M8028
◇ support S-type acceleration/deceleration, the time for acceleration and deceleration is independent
◇ Shaking pulse output supported
◇ E-CAM supported

Mua hàng
Giá : 3,650,000 ₫
Đặt mua

General

  LX3V Series LX3VP Series LX3VE/3VM Series
Running Mode Round Scan/InterruptRound Scan/ Interrupt
Programming Instruction List/LadderInstruction List / Ladder
Total Instructions Basic Instructions: 27/Applied Instruction: 136+2 Basic Instructions: 27 /Applied Instruction: 136+2 140        140
Execute Time Basic Instructions: 0.06us /Applied Instruction: 1~10usBasic Instructions: 0.06us /Applied Instruction: 1~10us
System Storage 16k16K 64k64K 32k32K
Download / Monitor Serial Programming Cable/ Mini USBSerial Programming Cable/ Mini USB
High Speed Pulse Output Transistor Type: 2 Channels(4 channels optional) / Relay N/A(2 channels optional)Transistor : 2 Channels(4 channels optional) / Relay N/A(2 channels optional)
External Interrupt 6 Channels6 Channels
Timer Interrupt 3 Channels
Holding Addresses Adjustable
Storage FLASH
Filter For all X input terminals
Serial  Port

COM1:RS422 or RS485

COM2:RS485

Temperature Operating Temperature:0 ~ 55℃/Storage Temperature:0 ~ 70℃
Humidity 35~85%RH (Without condensation)
Shock Resistance JIS C0040 Standard
Noise Immunity Noise Voltage:1000Vp-p Pulse; Width:1us;  Frequency:30-100Hz (Noise Simulator)

Output

Item Relay Output Transistor Output
Output Type -- NPN
Input Power Supply DC 24V DC 24V
Output Circuit <AC 250V;DC 30V  DC 5~30V 
COM Port Current -- <0.1mA(DC 30V)
Insulation Mechanistic Optical Coupling
Leak Current -- 0.1mA/DC 30V
Min.Load --  DC 5V 2mA

 

 

 Max.Load

Resistive

2A point 8A COM port 0.5A point 0.8A COM port 0.3A HSPO point
Inductive 80VA 12W/DC 24V7.2WHSPO point
GeneralGeneral 100W 0.9W/DC 24V

 

Response Time

ON <10ms
<0.2ms
(Pulse out put terminal:<5us)
OFF

AC Power Supply

                     Item

LX3V(P)0806M/1208M/1212M/1412M LX3V(P)1616M/2416M/3624M
Voltage AC100~240V 50~60Hz
Power Outage Time 10ms
Rush Current <15A 5ms/AC 100V; <30A 5ms/AC 200V
Power Fuse 250V 1A 250V 3.15A
Power Consumption <35w
<60w
Power Output DC 24V 850mA DC 24V 700mA

DC Power Supply

Item LX3V/LX3VP
Power Supply DC 24V±10%
Power Outage Time 10ms
Power Fuse 250V 3.15A
Rush Current <15A 1ms/DC 24V
Power Consumption

<30w

Sản phẩm cùng loại

Wecon 26 I/O PLC : LX3VE-1412MT

Wecon 26 I/O PLC : LX3VE-1412MT

Wecon 26 I/O PLC : LX3VE-1412MT

◇ CPU: STM32 CPU,A: AC100-240V power, D:DC24V power. 20W rated power
◇ IO: 14xDI/12xDO (transistor-type), 2-channel 200K high-speed pulse output
◇ Port:2 serial port (RS422/ RS485, RS485), 1 BD board supported.
◇ Protocol:  FX2N NO PROTOCOL, LX3VE PROTOCOL
◇ Support 32K-step ladder.
◇ Support N:N network, one PLC could connect eight PLCs;
◇ T50~T191 can be changed to 1ms timers by M8028
◇ support S-type acceleration/deceleration, the time for acceleration and deceleration is independent
◇ Shaking pulse output supported
◇ E-CAM supported

Wecon 26 I/O PLC : LX3VE-1412MT4H

Wecon 26 I/O PLC : LX3VE-1412MT4H

Wecon 26 I/O PLC : LX3VE-1412MT4H

◇ CPU: STM32 CPU, A: AC100-240V power, D:DC24V power. 20W rated power
◇ IO: 14xDI/12xDO (transistor-type), 4-channel 200K high-speed pulse output
◇ Port:2 serial port (RS422/ RS485, RS485), 1 BD board supported.
◇ Protocol:  FX2N NO PROTOCOL, LX3VE PROTOCOL
◇ Support 32K-step ladder.
◇ Support N:N network, one PLC could connect eight PLCs;
◇ T50~T191 can be changed to 1ms timers by M8028
◇ support S-type acceleration/deceleration, the time for acceleration and deceleration is independent
◇ Shaking pulse output supported
◇ E-CAM supported

Wecon 32 I/O PLC : LX3VE-1616MT4H

Wecon 32 I/O PLC : LX3VE-1616MT4H

Wecon 32 I/O PLC : LX3VE-1616MT4H

◇ CPU: STM32 CPU, A: AC100-240V power, D:DC24V power. 20W rated power
◇ IO: 16xDI/16xDO (transistor-type), 4-channel 200K high-speed pulse output
◇ Port:2 serial port (RS422/ RS485, RS485), 2 BD board supported.
◇ Protocol:  FX2N NO PROTOCOL, LX3VE PROTOCOL
◇ Support 32K-step ladder.
◇ Support N:N network, one PLC could connect eight PLCs;
◇ T50~T191 can be changed to 1ms timers by M8028
◇ support S-type acceleration/deceleration, the time for acceleration and deceleration is independent
◇ Shaking pulse output supported
◇ E-CAM supported

Wecon 40 I/O PLC : LX3VE-2416MT

Wecon 40 I/O PLC : LX3VE-2416MT

Wecon 40 I/O PLC : LX3VE-2416MT

◇ CPU: STM32 CPU, A: AC100-240V power, D:DC24V power. 20W rated power
◇ IO: 24xDI/16xDO (transistor-type), 2-channel 200K high-speed pulse output
◇ Port:2 serial port (RS422/ RS485, RS485), 2 BD board supported.
◇ Protocol:  FX2N NO PROTOCOL, LX3VE PROTOCOL
◇ Support 32K-step ladder.
◇ Support N:N network, one PLC could connect eight PLCs;
◇ T50~T191 can be changed to 1ms timers by M8028
◇ support S-type acceleration/deceleration, the time for acceleration and deceleration is independent
◇ Shaking pulse output supported
◇ E-CAM supported

Wecon 40 I/O PLC : LX3VE-2416MT4H

Wecon 40 I/O PLC : LX3VE-2416MT4H

Wecon 40 I/O PLC : LX3VE-2416MT4H

◇ CPU: STM32 CPU, A: AC100-240V power, D:DC24V power. 20W rated power
◇ IO: 24xDI/16xDO (transistor-type), 4-channel 200K high-speed pulse output
◇ Port:2 serial port (RS422/ RS485, RS485), 2 BD board supported.
◇ Protocol:  FX2N NO PROTOCOL, LX3VE PROTOCOL
◇ Support 32K-step ladder.
◇ Support N:N network, one PLC could connect eight PLCs;
◇ T50~T191 can be changed to 1ms timers by M8028
◇ support S-type acceleration/deceleration, the time for acceleration and deceleration is independent
◇ Shaking pulse output supported
◇ E-CAM supported

Wecon 48 I/O PLC : LX3VE-2424MT

Wecon 48 I/O PLC : LX3VE-2424MT

Wecon 48 I/O PLC : LX3VE-2424MT

◇ CPU: STM32 CPU, A: AC100-240V power, D:DC24V power. 20W rated power
◇ IO: 24xDI/24xDO (transistor-type), 2-channel 200K high-speed pulse output
◇ Port:2 serial port (RS422/ RS485, RS485), 2 BD board supported.
◇ Protocol:  FX2N NO PROTOCOL, LX3VE PROTOCOL
◇ Support 32K-step ladder.
◇ Support N:N network, one PLC could connect eight PLCs;
◇ T50~T191 can be changed to 1ms timers by M8028
◇ support S-type acceleration/deceleration, the time for acceleration and deceleration is independent
◇ Shaking pulse output supported
◇ E-CAM supported

Wecon 60 I/O PLC : LX3VE-3624MT

Wecon 60 I/O PLC : LX3VE-3624MT

Wecon 60 I/O PLC : LX3VE-3624MT

◇ CPU: STM32 CPU, A: AC100-240V power, D:DC24V power. 20W rated power
◇ IO: 36xDI/24xDO (transistor-type), 2-channel 200K high-speed pulse output
◇ Port:2 serial port (RS422/ RS485, RS485), 2 BD board supported.
◇ Protocol:  FX2N NO PROTOCOL, LX3VE PROTOCOL
◇ Support 32K-step ladder.
◇ Support N:N network, one PLC could connect eight PLCs;
◇ T50~T191 can be changed to 1ms timers by M8028
◇ support S-type acceleration/deceleration, the time for acceleration and deceleration is independent
◇ Shaking pulse output supported
◇ E-CAM supported

Wecon 60 I/O PLC : LX3VE-3624MT4H

Wecon 60 I/O PLC : LX3VE-3624MT4H

Wecon 60 I/O PLC : LX3VE-3624MT4H

◇ CPU: STM32 CPU, A: AC100-240V power, D:DC24V power. 20W rated power
◇ IO: 36xDI/24xDO (transistor-type), 4-channel 200K high-speed pulse output
◇ Port:2 serial port (RS422/ RS485, RS485), 2 BD board supported.
◇ Protocol:  FX2N NO PROTOCOL, LX3VE PROTOCOL
◇ Support 32K-step ladder.
◇ Support N:N network, one PLC could connect eight PLCs;
◇ T50~T191 can be changed to 1ms timers by M8028
◇ support S-type acceleration/deceleration, the time for acceleration and deceleration is independent
◇ Shaking pulse output supported
◇ E-CAM supported

Wecon 48 I/O PLC : LX3VE-2424MT4H

Wecon 48 I/O PLC : LX3VE-2424MT4H

Wecon 48 I/O PLC : LX3VE-2424MT4H

◇ CPU: STM32 CPU, A: AC100-240V power, D:DC24V power. 20W rated power
◇ IO: 24xDI/24xDO (transistor-type), 4-channel 200K high-speed pulse output
◇ Port:2 serial port (RS422/ RS485, RS485), 2 BD board supported.
◇ Protocol:  FX2N NO PROTOCOL, LX3VE PROTOCOL
◇ Support 32K-step ladder.
◇ Support N:N network, one PLC could connect eight PLCs;
◇ T50~T191 can be changed to 1ms timers by M8028
◇ support S-type acceleration/deceleration, the time for acceleration and deceleration is independent
◇ Shaking pulse output supported
◇ E-CAM supported

Hotline
Quý khách có nhu cầu vui lòng liên hệ