Wecon 40 I/O PLC : LX3VM-2416MT

◇ CPU: STM32 CPU, A: AC100-240V power, D:DC24V power. 20W rated power
◇ IO: 24xDI/16xDO (transistor-type), 2-channel 200K high-speed pulse output
◇ Port:2 serial port (RS422/ RS485, RS485), 2 BD board supported.
◇ Protocol: FX2N NO PROTOCOL, LX3VE PROTOCOL
◇ Support 32K-step ladder.
◇ Support N:N network, one PLC could connect eight PLCs;
◇ T50~T191 can be changed to 1ms timers by M8028
◇ support S-type acceleration/deceleration, the time for acceleration and deceleration is independent
◇ Shaking pulse output supported
◇ E-CAM supported
◇ Inter-polation supported

Mua hàng

Giá : 5,914,000 ₫

Đặt mua

Phần mềm hỗ trợ Tài liệu hướng dẫn Liên hệ

PLC Introduction-1.jpg

PLC Introduction 2.jpg

General

	LX3V Series	LX3VP Series	LX3VE/3VM Series
Running Mode	Round Scan/InterruptRound Scan/ Interrupt
Programming	Instruction List/LadderInstruction List / Ladder
Total Instructions	Basic Instructions: 27/Applied Instruction: 136+2 Basic Instructions: 27 /Applied Instruction: 136+2		140 140
Execute Time	Basic Instructions: 0.06us /Applied Instruction: 1~10usBasic Instructions: 0.06us /Applied Instruction: 1~10us
System Storage	16k16K	64k64K	32k32K
Download / Monitor	Serial Programming Cable/ Mini USBSerial Programming Cable/ Mini USB
High Speed Pulse Output	Transistor Type: 2 Channels(4 channels optional) / Relay N/A(2 channels optional)Transistor : 2 Channels(4 channels optional) / Relay N/A(2 channels optional)
External Interrupt	6 Channels6 Channels
Timer Interrupt	3 Channels
Holding Addresses	Adjustable
Storage	FLASH
Filter	For all X input terminals
Serial Port	COM1:RS422 or RS485 COM2:RS485
Temperature	Operating Temperature：0 ~ 55℃/Storage Temperature：0 ~ 70℃
Humidity	35~85%RH (Without condensation)
Shock Resistance	JIS C0040 Standard
Noise Immunity	Noise Voltage:1000Vp-p Pulse; Width:1us; Frequency:30-100Hz (Noise Simulator)

Output

Item		Relay Output	Transistor Output
Output Type		--	NPN
Input Power Supply		DC 24V	DC 24V
Output Circuit		<AC 250V;DC 30V	DC 5~30V
COM Port Current		--	<0.1mA(DC 30V)
Insulation		Mechanistic	Optical Coupling
Leak Current		--	0.1mA/DC 30V
Min.Load		--	DC 5V 2mA
Max.Load	Resistive	2A point 8A COM port	0.5A point 0.8A COM port 0.3A HSPO point
	Inductive	80VA	12W/DC 24V7.2WHSPO point
	GeneralGeneral	100W	0.9W/DC 24V
Response Time	ON	<10ms	<0.2ms (Pulse out put terminal：<5us)
	OFF

AC Power Supply

Item	LX3V(P)0806M/1208M/1212M/1412M	LX3V(P)1616M/2416M/3624M
Voltage	AC100~240V 50~60Hz
Power Outage Time	10ms
Rush Current	<15A 5ms/AC 100V; <30A 5ms/AC 200V
Power Fuse	250V 1A	250V 3.15A
Power Consumption	<35w	<60w
Power Output	DC 24V 850mA	DC 24V 700mA

DC Power Supply

Item	LX3V/LX3VP
Power Supply	DC 24V±10%
Power Outage Time	10ms
Power Fuse	250V 3.15A
Rush Current	<15A 1ms/DC 24V
Power Consumption	<30w

Sản phẩm cùng loại

Wecon 26 I/O PLC : LX3VM-1412MT

◇ CPU: STM32 CPU, A: AC100-240V power, D:DC24V power. 20W rated power
◇ IO: 14xDI/12xDO (transistor-type), 2-channel 200K high-speed pulse output
◇ Port:2 serial port (RS422/ RS485, RS485), 1 BD board supported.
◇ Protocol: FX2N NO PROTOCOL, LX3VE PROTOCOL
◇ Support 32K-step ladder.
◇ Support N:N network, one PLC could connect eight PLCs;
◇ T50~T191 can be changed to 1ms timers by M8028
◇ support S-type acceleration/deceleration, the time for acceleration and deceleration is independent
◇ Shaking pulse output supported
◇ E-CAM supported
◇ Inter-polation supported

Wecon 32 I/O PLC : LX3VM-1616MT

◇ CPU: STM32 CPU, A: AC100-240V power, D:DC24V power. 20W rated power
◇ IO: 16xDI/16xDO (transistor-type), 2-channel 200K high-speed pulse output
◇ Port:2 serial port (RS422/ RS485, RS485), 2 BD board supported.
◇ Protocol: FX2N NO PROTOCOL, LX3VE PROTOCOL
◇ Support 32K-step ladder.
◇ Support N:N network, one PLC could connect eight PLCs;
◇ T50~T191 can be changed to 1ms timers by M8028
◇ support S-type acceleration/deceleration, the time for acceleration and deceleration is independent
◇ Shaking pulse output supported
◇ E-CAM supported
◇ Inter-polation supported

Wecon 48 I/O PLC : LX3VM-2424MT

◇ CPU: STM32 CPU, A: AC100-240V power, D:DC24V power. 20W rated power
◇ IO: 24xDI/24xDO (transistor-type), 2-channel 200K high-speed pulse output
◇ Port:2 serial port (RS422/ RS485, RS485), 2 BD board supported.
◇ Protocol: FX2N NO PROTOCOL, LX3VE PROTOCOL
◇ Support 32K-step ladder.
◇ Support N:N network, one PLC could connect eight PLCs;
◇ T50~T191 can be changed to 1ms timers by M8028
◇ support S-type acceleration/deceleration, the time for acceleration and deceleration is independent
◇ Shaking pulse output supported
◇ E-CAM supported
◇ Inter-polation supported

Wecon 48 I/O PLC : LX3VM-2424MT4H

◇ CPU: STM32 CPU, A: AC100-240V power, D:DC24V power. 20W rated power
◇ IO: 24xDI/24xDO (transistor-type), 4-channel 200K high-speed pulse output
◇ Port:2 serial port (RS422/ RS485, RS485), 2 BD board supported.
◇ Protocol: FX2N NO PROTOCOL, LX3VE PROTOCOL
◇ Support 32K-step ladder.
◇ Support N:N network, one PLC could connect eight PLCs;
◇ T50~T191 can be changed to 1ms timers by M8028
◇ support S-type acceleration/deceleration, the time for acceleration and deceleration is independent
◇ Shaking pulse output supported
◇ E-CAM supported
◇ Inter-polation supported

Wecon 60 I/O PLC : LX3VM-3624MT

◇ CPU: STM32 CPU, A: AC100-240V power, D:DC24V power. 20W rated power
◇ IO: 36xDI/24xDO (transistor-type), 2-channel 200K high-speed pulse output
◇ Port:2 serial port (RS422/ RS485, RS485), 2 BD board supported.
◇ Protocol: FX2N NO PROTOCOL, LX3VE PROTOCOL
◇ Support 32K-step ladder.
◇ Support N:N network, one PLC could connect eight PLCs;
◇ T50~T191 can be changed to 1ms timers by M8028
◇ support S-type acceleration/deceleration, the time for acceleration and deceleration is independent
◇ Shaking pulse output supported
◇ E-CAM supported
◇ Inter-polation supported

Wecon 60 I/O PLC : LX3VM-3624MT4H

◇ CPU: STM32 CPU, A: AC100-240V power, D:DC24V power. 20W rated power
◇ IO: 36xDI/24xDO (transistor-type), 4-channel 200K high-speed pulse output
◇ Port: 2 serial port (RS422/ RS485, RS485), 2 BD board supported.
◇ Protocol: FX2N NO PROTOCOL, LX3VE PROTOCOL
◇ Support 32K-step ladder.
◇ Support N:N network, one PLC could connect eight PLCs;
◇ T50~T191 can be changed to 1ms timers by M8028
◇ support S-type acceleration/deceleration, the time for acceleration and deceleration is independent
◇ Shaking pulse output supported
◇ E-CAM supported
◇ Inter-polation supported

Wecon 26 I/O PLC : LX3VM-1412MT4H

◇ CPU: STM32 CPU, A: AC100-240V power, D:DC24V power. 20W rated power
◇ IO: 14xDI/12xDO (transistor-type), 4-channel 200K high-speed pulse output
◇ Port: 2 serial port (RS422/ RS485, RS485), 1 BD board supported.
◇ Protocol: FX2N NO PROTOCOL, LX3VE PROTOCOL
◇ Support 32K-step ladder.
◇ Support N:N network, one PLC could connect eight PLCs;
◇ T50~T191 can be changed to 1ms timers by M8028
◇ support S-type acceleration/deceleration, the time for acceleration and deceleration is independent
◇ Shaking pulse output supported
◇ E-CAM supported
◇ Inter-polation supported

Wecon 32 I/O PLC : LX3VM-1616MT4H

◇ CPU: STM32 CPU, A: AC100-240V power, D:DC24V power. 20W rated power
◇ IO: 16xDI/16xDO (transistor-type), 4-channel 200K high-speed pulse output
◇ Port: 2 serial port (RS422 /RS485, RS485), 2 BD board supported.
◇ Protocol: FX2N NO PROTOCOL, LX3VE PROTOCOL
◇ Support 32K-step ladder.
◇ Support N:N network, one PLC could connect eight PLCs;
◇ T50~T191 can be changed to 1ms timers by M8028
◇ support S-type acceleration/deceleration, the time for acceleration and deceleration is independent
◇ Shaking pulse output supported
◇ E-CAM supported
◇ Inter-polation supported

Wecon 40 I/O PLC : LX3VM-2416MT4H

◇ CPU: STM32 CPU, A: AC100-240V power, D:DC24V power. 20W rated power
◇ IO: 24xDI/16xDO (transistor-type), 4-channel 200K high-speed pulse output
◇ Port: 2 serial port (RS422/ RS485, RS485), 2 BD board supported.
◇ Protocol: FX2N NO PROTOCOL, LX3VE PROTOCOL
◇ Support 32K-step ladder.
◇ Support N:N network, one PLC could connect eight PLCs;
◇ T50~T191 can be changed to 1ms timers by M8028
◇ support S-type acceleration/deceleration, the time for acceleration and deceleration is independent
◇ Shaking pulse output supported
◇ E-CAM supported
◇ Inter-polation supported